Mizuno Range

                                          MX700 DRIVERS £165                 MX FAIRWAY £99

MX-700 Hot Metal Driver
The new Hot Metal MX-700 utilizes a new rolled Ti9 plasma welded face to advance driving distance, stability & feedback. The Ti9 Hot Metal adds ball speed across the clubface through its unique aligned grain structure -expanding the high COR area for consistently long drives. A vibration dampening internal hull adds a solid, powerful sensation at impact. A broad, wide geometry (allowed by Ti9’s weight saving) provides an extremely low & deep COG & a centrally located sweet spot for enhanced vertical stability. Resulting in low spin & a high, penetrating ball flight.

• Hot Metal Ti-9 titanium face
  Possesses a unique aligned grain structure, expanding the high COR area for distance from off-centre strikes.
• Enhanced vertical stability
  Head geometry provides an extreme low and deep COG for a high, low spinning, penetrating ball flight.
• Extreme MOI
  Largest, most forgiving geometry achievable.
• Power Hull re-enforcement
  Internal reinforcements for powerful feel and sound.

Handicap Guide

Suitable for all Handicap

Specifications

Shaft Properties



Exsar DS4 Graphite Shaft, Flex - LL, L, LT, R, S

Fujikura Fit-On 150 Graphite Shaft, Flex - LL, L, LT, R, S

Hot Metal ES-230 STEEL FACE

MX-700 Hot Metal Fairway Wood
The MX-700 brings Hot Metal performance to the fairway with a new ES230 steel face. Weight saved from the ES230 steel face also allows an increased crown width optimising the COR effect & encouraging use from the tee as a genuine driver alternative. An extreme light-weight plasma welded ES230 steel face increases COR for higher ball speeds, maximum energy transfer & increased strike range from the fairway.

• Hot Metal ES230 steel face
  Extremely strong, thin, and light weight face for an increased energy transfer and increased ball speed.
• Broad crown profile
  Weight savings from the face allow redistribution to optimise launch angle and carry.
• Increased face area
  Overall face size increase optimizes ‘Hot Metal’ effect.
• Mizuno Exsar FS4 shaft
  Parallel development with MX-700 fairway wood for flight optimisation.

Handicap Guide


Suitable for all Handicaps

Specifications

Shaft Properties



Exsar FS4 Graphite Shaft, Flex - LL, L, LT, R, S

                                                                                                                MP58 3-PW  £649           

Mizuno MP-58 Irons (Steel Shaft)

The next generation of Mizuno blades, the MP-58 combines the workability of a traditional muscleback with the forgiveness of multi material construction. An 11 gram Titanium insert, forged directly into the outer muscle of the MP-58, increases thickness behind impact for a unique solid feel whilst dramatically increasing perimeter weighting for stability from off centre hits. A thinner topline and sole (than the retired MP-57) anchor the MP-58’s COG close to the clubface – ensuring that increased forgiveness is not created at the expense of a penetrating ball flight or workability. More forgiving than the MP-62 and more workable than the deeper weighted MP-52 , the MP-58 Ti Muscle gives shotmakers a new uncompromising alternative.

Dual Muscle Ti
Insert plate for both increased solidity and workability
Modal Analysis Design
Highly tuned feel following research on vibration and sound patterns
Grain Flow Forged
Titanium insert forged within 1025E Pure Select mild carbon steel billet
Tour design sole
Rolled leading/trailing edges, and flattened midsole for precision ball striking
Double Nickel Mirror Chrome
Plated, durable finish for long term appearance
2010 Conforming grooves
Precision forged to meet new R&A and USGA guidelines

Handicap Guide

Suitable for V. Low - Low Handicaps

Shaft Option

Dynamic Gold (R300, S300)

Project X Rifle (5.5)

Specifications

                                                                MX200 3-PW  £485              

MX-200 Irons (Steel Shaft)

The MX-200 takes Grain Flow Forged forgiveness a quantum leap forward with the introduction of Y-Tune performance. A deep pocket cavity, milled to preserve MX-200's one piece feel is complemented by a Y shaped reinforcement pad, extending a 5% larger sweet area* into the toe - matching the miss hit patterns of amateur golfers. Enhanced solidity in the hitting area and an aggressive triple cut sole design ensures MX-200's place in the bags of both professionals and amateurs.

• Y-Tune Stability - Extended sweet area aligned to match toe miss hits.
• Milled Pocket Cavity - 3-7 iron for stunning one piece feel and amazing forgiveness.
• Triple Cut Sole - Aggressive camber for improved ball striking.
• Grain Flow Forged - 1025E Pure Select mild carbon steel for solid feel and distance control.
• Double Nickel Chrome Plated - Polished finish and durability.
• Forged U-Grooves - Optimum spin and control.  

Specifications

Shaft Options

Steel Shaft - Dynalite Gold XP (Flex R300, S300)
*Custom Shaft Option Available.

                                                                                                                MP52 3-PW £585         

MP-52 Irons (Steel Shaft)

The tour profiled MP-52 integrates a discreet pocket cavity for an uncompromising balance of shot-making and forgiveness. Twin crescents milled into the MP-52 deepen its COG* - increasing stability from off centre hits, while remaining hidden at address. A central impact bar and DUAL MUSCLE ensure that feel and feedback are tuned to meet professional expectations. Custom set build available from 3-PW. *Centre of Gravity

• Pocket Cavity: CNC Milled slot from 3-7 iron for increased forgiveness.
• Tour Preferred Profile: Pocket cavity hidden at address.
• Dual Muscle: Internal muscle reinforces impact area for exceptional feel.
• Dual Camber Sole: Reduces turf drag from increased sole width.
• Grain Flow Forged: 1025E Pure Select mild carbon steel for solid feel and distance control.
• Double Nickel Chrome Plated: Polished finish and durability.
• Forged U-Grooves: Optimum spin and control

Handicap Guide

Suitable for V. Low - Mid Handicaps

Specification

Shaft Option


Dynamic Gold (R300, S300)

Project X Rifle (5.5)

* Custom Shaft Option Available.

                                                    MP FLI-HI £89                    MX FLI-HI  £89 

Mizuno MP-Fli Hi Driving Iron (Steel Shaft) 2010

The new MP FLI-HI is a stable, high flying, long iron replacement, designed to fit the flow of any MP iron set. With reduced offset and minimal bounce (compared to its predecessor) the MP Fli-Hi has a playing profile that sits comfortably alongside the MP-68, MP-62, MP-58 and MP-52, with workability not neutralised in the quest for forgiveness. The new MP Fli-Hi increases distance through use of a Hot Metal plasma welded, thin ES230 maraging steel face, attached to a high tech stainless steel body. This exotic design technology delivers high and consistent COR numbers for increased ball speed and distance. A Hollow Construction positions the COG low and deep for a high, controlled ball flight.

MX Fli-Hi Driving Iron (Steel Shaft)
The MX Fli-Hi with Y-Tune Technology offers a high flying, soft landing direct alternative to the standard 3,4 or 5 iron. Exact iron lengths are complemented by a unique drop down crown, allowing lie angles to be adjusted to match custom-fitted Mizuno iron sets.Y-Tune technology exploits increased sole thickness to the toe area to rotate the effective hitting area higher into the toe, matching the amateur miss hit pattern. Confident ball striking is enhanced through a heel weighted draw bias.

Mizuno MP T-10 White Satin Wedge (Steel Shaft)

Introducing Mizuno’s QUAD CUT GROOVE - for visibly increased backspin and ball stopping ability in all playing conditions.Mizuno’s QUAD CUT Technology uses a combination of adjustments to various parts of the groove – specifically to improve traction on shorter shots. In combination with Mizuno’s one piece Grain Flow Forged construction, the QUAD CUT GOOVE ensures that the T-10 delivers the ultimate in wedge feel and control across its full range of distance. Using a new custom milling tool Mizuno combines it new QUAD CUT GROOVE design with a tighter manufacturing tolerance - ensuring that groove width, depth, draft angle and shoulder radius are consistently pushed to their legal extremities. Spin rates are accompanied by the shot making prowess of a compact teardrop shape. The thicker topline is bevelled down a 360 grind, which also keeps the lead edge tight to the ground on a variety of shots.

                                      MP-10 WEDGES-£89

                              TOUR CART £195              SPEEDSTER £99

                                                                                                                    SPEEDSTER £99

                                         AIROLITE £89.95 

                                      WEEKENDER £54.95

                                                  POLO SHIRTS £29.95                      BODY MOCK £19.95

                                                                      MIZUNO CUSTOM FIT

• Introduction

  Mizuno offers a unique custom fitting service allowing amateur golfers to enjoy golf equipment adapted to their individual needs..

  What is custom fitting?

  Custom Fitting is the process by which golf equipment is tailored to an individual's unique needs. Custom Fitting can be used to achieve many different aims;

  • adapting to a players physical dimensions (taller / shorter / large hands etc),
  • reducing the impact of a consistent swing fault,
  • to encourage the correct technique,
  • to eliminate a specific shot,

  in order to deliver the clubface in a square position at impact more often than if the player was using equipment in the standard make up.

  Who needs custom fitting?

  At its more technical level Custom Fitting can build low handicap golfers and professionals a more efficient swing with shafts fitted to their swing speeds and tempo.

  Higher handicap players can use adjustments in lie angles and shafts to overcome repetitive swing faults. Improvers and beginners need well fitted equipment to encourage the correct set up - the foundation for a solid game.

  How do I find the right 'Fit'?

  An experienced and well trained club fitter will be able to make an accurate assessment of your needs. An experienced fitter will consider your physical dimensions 'static fit' as well as assessing your technique 'dynamic fit'. A hitting session is the only reliable way to confirm the results of the Custom Fitting.

  Do my current clubs fit?

  Unless professionally fitted your current equipment could be partly responsible for the less desirable parts of your game. Some examples to check below:

  • Shafts too flexible
  • Ball flight too high
  • Hooking ball flight
  • Inconsistency
  • Shafts too stiff
  • Ball flight too low
  • Weak shots right
  • Poor distance
  • Clubs too long
  • Fat shots
  • Inconsistent striking
  • Falling away at impact
  • Clubs too short
  • Thinned low shots
  • Falling forwards at impact
  • Excess knee flex
  • Lie too flat
  • Missing to the right
  • Over strong grip
  • Over use of hands
  • Lie too upright
  • Ball flight left

   

  • Weak grip
  • Dislike 'tight' lies